S.36

The standard chair alarm can be installed in almost any chair. The sensor mat is placed on the seat of the chair, under the rump.

The electronic box can be attached to the back of the (wheel) chair. If the resident / patient stands up, and thus the pressure on

the sensor mat reduced or disappears, after about 3 seconds (the delay to prevent false alarms is adjustable) the alarm occurred.

The system is powered by a battery.

S.36z

Chair alarm for emergency nurse call

The chair emergency nurse call is equivalent to the standard seat alarm but can be connected to a nurse call.

However, this does not work with a wheelchair but only with stationary chairs. The sensor mat is placed on the seat of the chair,

under the rump. The lead from the sensor mat is placed in the emergency nurse call system.

If the resident / patient leaves the chair, in about 3 seconds (the delay is adjustable and is to prevent false alarms), the alarm will be activated.

S.36R

Chair alarm wireless

The chair S.36R alarm is a wireless version of the chair alarm S.36.

The wireless chair alarm is designed for an environment where no nurse call system is available and the distance to another

room is too large, to use an extension cord to bridge.

The maximum range of this system is 30m depending on the environment in which it is used.

 

This product has limited availability.